Trash Bag Holder Dispenser XL Plus for large 6"/150mm diameter trash bag rolls (SamsClub Hefty 33 Gal Rolls)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An upsized version of Matt Carson's Trash Bag Holder XL, sized for trash bag rolls 6"/150 mm diameter
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 310
- Wydruki
- 2
- Wyświetlenia
- 1416
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a larger version of the well designed, sturdy, simple to print original Trash Bag Holder XL. Large 33 gal trash bags in family size boxes from Sams Club, Costco, BJ's etc will fit in this larger version. I also added mounting holes to the base, and support rings to the cylinder to make sure it could handle the weight of large heavy duty trash bags.
I printed this with the closed flat end sitting on the build plate of my Bambu X1C.
This is 230 mm long/high. If you print this on a Prusa I3, you'll either need to reduce the length by 10%, or orient the print so that the base is on the build plate. There will be some bridging required, but I expect it will print ok, with a little stringing internally.
I printed this from PETG with 4 walls, and attached it to the underside of shelves with zip ties, in my garage.