1 / 5
GoPro Coolant Line Mount — zdjęcie 1
1 / 5

GoPro Coolant Line Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is for the end of 1/4" ID Loc-Line Any-Which-Way Coolant Hose. It makes for a great clamp mount for GoPro cameras.

Ocena
0 / 5
Polubienia
5
Pobrania
21
Wydruki
0
Wyświetlenia
522
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

This is for the end of 1/4" ID Loc-Line Any-Which-Way Coolant Hose.

It makes for a great clamp mount for GoPro cameras.

Instructions

Print the mount, use epoxy (like J-B weld or Kwik) scuff up the end of the loc-line that will be epoxied to allow the epoxy to get a good grip.

I choose Bessy 4" clamp from local Lowe's. A #10 bolt with fillips head will fit inside one of the loc-line elements perfectly and can be used to bolt it to pretty much anything. The Loc0Line was purchased from McMaster Carr for around $7.00 for a 1' length, I only used half of it as the weight of the camera is enough to make the full foot long piece droop on it's own but the 6" piece is nice and stable no matter the angle it's placed at.

Category: Camera

Tagi