Rocket Stand for Build a Spacecraft (Lego Technic)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand for building a custom rocket or spacecraft design using Lego Technic connectors
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- GNU General Public License v2.0
A stand for building a custom rocket or spacecraft design using Lego Technic connectors. Based on Smithsonian educational activity Build a Spacecraft: https://www.instructables.com/Design-a-Spacecraft/
See project file (.3mf) for suggested paint-on organic support points under the nozzle and under each connector cylinder base. DO NOT CONFIGURE SUPPORTS EVERYWHERE. It is too difficult to remove the supports from the holes and interior of the stand. Recommend using paint-on supports only. 5% infill should be more than enough, it gets very heavy with more infill.
Modular pieces to go with this stand can be found here: https://www.printables.com/model/971132-design-a-spacecraft-lego-technic-modular-pieces
Happy building!