Playing with Fusion User Parameters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The attached designs are an experiment with user parameters in Fusion. Feel free to comment and/or use these however.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Public Domain
The attached designs are an experiment with user parameters in Fusion. Feel free to comment and/or use these however you would like.
I have tried creating multi-colored prints using various techniques without any problems, my printer is an A1mini with AMS. I am working on creating “Objects that can be colored” embedded in the design which would automatically change filaments in Bambu Studio.
The user parameters and expressions are a bit convoluted since this whole project was done on the fly and is a work in progress.
The emboss sketch is parametric and “Square” is the size control point. (there are size limits to keep the geometry under control)
The cup ‘Height” parameter also has limits.
The Diameter is controlled by feature size and number of features in the pattern.
I would recommend adding a 1.0 mm chamfer to the overhanging edges of the emboss/deboss image. I tried adding that in the parameters, but it seemed a bit unreliable so for now I left it as a manual to do.