1 / 10
Large Cosplay Jewelry Drawer Organizer Storage Unit — zdjęcie 1
1 / 10

Large Cosplay Jewelry Drawer Organizer Storage Unit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Many short drawers for storing large jewelry pieces that aren't thick but have to lay flat.

Ocena
5 / 5
Polubienia
29
Pobrania
101
Wydruki
1
Wyświetlenia
858
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

I have a large amount of cosplay / costume jewelry, particularly necklaces, that need to lay flat. Most jewelry organizers suggest hanging necklaces from small pegs, but that doesn't work when the main setting for the necklace is ~4 inches wide. Most jewelry boxes have one drawer that large, maybe two, but they aren't compartmentalized and so the necklaces tangle.

So, I made a box that has many short drawers. The drawers are broken up into multiple compartments to allow storage for different-sized jewelry. With six drawers, I'm using four for jewelry and the other two for cosplay makeup and accessories like elf ears and fake nails and the like, that don't belong with ‘regular makeup’ but are difficult to store elsewhere. 

Interior dimensions of the box are 190X190mm and 25mm tall. 

 

Drawers should be printed at their regular orientation (bottom on the bottom), and do not need supports. If the drawer unit is placed on its back, (with the front facing up) it also prints without supports. 

I printed mine with regular PLA, .4mm nozzle, .2mm layer height. The drawers are all different colors because I'm using the tail ends of spools left over from other projects.

Tagi