Unisex Bathroom Sign - Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a slight modification (remix) of ntalekt's excellent bathroom sign.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
ntalekt did a really great sign. I needed it to match our existing signs. His model was virtually identical, but I liked the braille to give even more accessibility, and filleting the corners matched the shape of my existing signs (and I thought it gave the sign a slightly more refined look).
Some printing instructions: First, print it face-up. If you're using a single-color printer as I am, you'll want a filament change instruction at layer 16 (assuming a 0.2 mm layer thickness). If you're using Cura, you can go to the “Extensions” menu, then select “Post Processing” and from the fly-out menu select “Modify G-Code.”
From the new window that opens, click on “Add a Script,” then select “Filament Change.” In the parameters, check the “Enable” box. In the layer entry, type “16.” In my configuration, trying the firmware version didn't work, so I didn't change anything else.