1 / 1
Simple 'V' block for small pedestal drill — zdjęcie 1

Simple 'V' block for small pedestal drill

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Three part file 'V' block, block and two alignment tools.

Ocena
5 / 5
Polubienia
29
Pobrania
164
Wydruki
1
Wyświetlenia
614
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

'V' block has two angles, I use it to centre pipe in my drill press.

Align the drill chuck to the block by placing the ‘D’ end in the chuck and pushing into ‘V’ block centre hole.

The other is used to centre the bottom of the ‘V’ block to the drill table hole.

Once in position I use side clamps but up to your requirements.

Tagi