1 / 2
ID card holder | Heavy duty | Enclosed | Print In Place
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sturdy card holder for 86x54x3mm cards | can be embossed | Print in place |
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 759
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
For 86x54x3mm card
Printed with PETG
15-20%infill
supports recommended
the hinge was made with 0.2mm tolerance (it works with PLA too)
To break free the piece use flat surface and bend up the part with the hexagon in it.