E3D REVO KUSBA / ADXL345 Accelerometer Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The easiest and best way to mount an accelerometer to your E3D REVO hotend.
- Ocena
- 4 / 5
- Polubienia
- 6
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The easiest and best way to mount an accelerometer to your E3D REVO hotend.
Designed to mount a KUSBA or standard ADXL345 Accelerometer board to your E3D REVO hotend. There are two models: 1) Standard M3x12 screws and M3 nuts. 2) M3 heat-insert w/M3x8 screws.
- Requires one (1) M4x40 bolt or screw.
- Standard ADXL345 hole spacing is 15mm between centers.
While cold, remove the REVO nozzle and screw this mount with your accelerometer attached. Remove the mount and replace your nozzle after using the accelerometer.
The Revo nozzle weighs 8 g., this mount with the KUSBA attached weighs 16 g.
Printed with Hatchbox ABS in blue.
If you like my designs and want to send me a tip, you can do so via PayPal….. Thank you and enjoy the models I create.