1 / 5
Ham Radio - Dipole and End Fed EFHW Winder with M5 Post Threads! — zdjęcie 1
1 / 5

Ham Radio - Dipole and End Fed EFHW Winder with M5 Post Threads!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Wire Winder and SO 239 connector for ham radio.

Ocena
5 / 5
Polubienia
113
Pobrania
647
Wydruki
1
Wyświetlenia
3722
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This winder is a little more Versatile than other iterations, subjectively.

It uses M5x0.8 Threads to allow each dipole post more secure into the winder. SO239, space for a T140-43 or smaller Toroid for a Choke.

Pictured is the dipole as a 20m dipole with 14 (I believe) gauge kevlar wire. Point being, this should have no issue holding portable wire types, like bntechgo, 20awg, 22 awg etc.

I have also kept the side slots for a cinch strap to be inserted (to secure the wire) as well as a "hanging hole". Clip a carabiner, rope, etc to make hanging easier.

I printed with ASA and tolerances are great. Get creative and make a fan dipole, efhw, etc.

This is still in development and I would appreciate findings, feedback, suggestions. Thanks.

I would ask if you print these to give away (non commercial license attached to this file), you give proper attribution. This helps me continue to make more positive changes while continuing to be able to make these.

If you would like to support me and purchase one of these from my etsy store (available soon) https://www.etsy.com/shop/HamRadioDudeSells.

Tagi