1 / 2
Round and oval bases for Warhammer 40k and AoS — zdjęcie 1
1 / 2

Round and oval bases for Warhammer 40k and AoS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Collection of Warhammer ground bases. Validated against real GW bases, getting more complete by the day.

Ocena
5 / 5
Polubienia
120
Pobrania
2124
Wydruki
3
Wyświetlenia
3994
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Updated 28th August 2024, current list of bases:

  • 25mm round
  • 25mm slotted round
  • 25mm hex-hole round (Skaventide box)
  • 32mm round
  • 32mm hex-hole round (Skaventide box)
  • 40mm round
  • 50mm round
  • 60mm round 
  • 60x35mm oval
  • 75x42mm oval
  • 105x70mm oval
  • 120x92mm oval

A collection of Warhammer 40k / AoS bases. Every single one of them is validated against real GW bases to make sure it matches perfectly, in both size, height, wall angle and oval profile. 

The collections gets more complete as I get a hang of more bases to validate against. Most notable difference is the 60mm base, that actually measures between 64.5mm and 65mm depending on a specimen. Real bases also vary in height depending on the specific batch, from 4mm up to 4.5mm, however such a variation should not be an issue at all, since the Z height might be impacted by bed level and printer's bed levelling mechanism.

For best results, print using black ASA/ ABS on Textured Sheet and “upside down”. PLA works well too, but won't stick using acetone-based glue. 

 

You can let me know in the comments if there's any specific base you're looking for.

 

 

Tagi