1 / 6
155mm howitzer shell
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
- Made an addition - crude fuse wrench.
- Shell fuse 2 and shell top fuse 2 have not been printed.
- Shell fuse 1 and shell top fuse 1 have been printed and fits tight if it's too tight the method i use is to dip it in boiling water for a minute or two and quickly threading it in and backing it out, repeat till threads are fully seated
- Fuse wrench is useful if it gets stuck and can tighten it to make it almost impossible to open by hand without damaging it
- Fuse set 2 and fuse set 1 are not interchangeable
- This is my first remix and may not be perfect