Beeline Moto 2 GPS Mount for Fantic Caballero
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts a Beeline Moto 2 GPS next to the Speedometer of Fantic Caballero 500
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 740
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This design mounts a Beeline 2 GPS beside the speedometer of a Fantic Caballero. It's printed in 3 parts.
The holder fastens to the clamp with an M3 screw and nut, and the clamp fits round the bike's ignition switch, tightened by a 25 mm M4 screw and nut.
The prototype was printed on a Prusa MK4 printer with a 0.6 mm nozzle and 0.32 mm layer height. That make the wings 1.16 thick (given first layer of 0.2) and produces a tight fit.
The wing thickness is critical as there are no detents to lock the GPS in place so it relies on friction.