Repwinder Cleat (Wallmount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for Repwinder
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 680
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Wallmount your repwinders.
Two parts, long and short. Short takes one repwinder, long takes two.
Combine for your number of repwinders. For a full MMU line up of five repwinders
you need two long and one short cleat.
Line up the parts with small wooden dowels. Just hammer them in IKEA style.
Mount on the wall with suitable screws. Don't overtighten.
Print face down like in picture. GCode from my multimaterial Mk3 but only one (default) color is selected. You should be able to use it anyway.. Or make your own GCode..
Repwinder by Pooch here: https://www.prusaprinters.org/prints/6174-repwinder-v214
Edit: (2023-03) I updated this model with more images of how i updated my repbox with this cleat. I had to cut it down a bit to fit inside the repbox but other than that is was a easy update.