Linking Bracelet Holder Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple bracelet holder stand that can be printed and connected multiple times.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 568
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple bracelet holder stand that can be patterned to hold as many bracelets as needed. Each stand has two arms to hold at least two bracelets, but I've found that as many as 4-5 bracelets can fit on a single arm.
The stands can fit up to 80mm tall bracelets (hanging) and the arms can hold up to a 45mm wide bracelet.
Printing Instructions (Standard):
I used PLA with 0.2mm layer height, 10% infill, 2 walls, and no supports. Each part is printed as oriented.
There are two parts: a stand and a connector. I have included a “minimum build” print file that consists of two stands and two connectors. Each additional stand will require two more connectors.
Each module consists of one stand and two connectors. Repeat this as many times as needed (the last module doesn't need connectors). Use superglue (or a soldering iron) to connect all of the parts together - the stands have embedded slots for the connectors.
Please comment with any questions or specific requests.
Happy Printing!