Camping Cutlery Box V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple screw top container for camping cutlery.
- Ocena
- 5 / 5
- Polubienia
- 240
- Pobrania
- 868
- Wydruki
- 6
- Wyświetlenia
- 2761
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact cutlery container with screw-on nut shaped cap to prevent it from rolling off the table.
This is an upgraded version of my previous model ( https://www.printables.com/model/258220-camping-cutlery-box )
The upgrades include thicker walls and stronger cap. While I was at it, I also included the STP file so that you can make your own upgrades.
While this model can be printed in PLA, it is recommended to use PETG since otherwise it might degrade when exposed to direct sunlight.
Model is pre-oriented and can be printed with 0.2 layer heights, 4 walls (@0.4mm nozzle) and 25% infill.