Poweredge T310 Drive Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This will allow you to put a SATA drive in a Dell T310 Server
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 82
- Wydruki
- 1
- Wyświetlenia
- 337
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Originally uploaded on Thingiverse before Printables was a thing.
I have a T310 that needed to have a couple of drives added so I did my best to make a quick drive caddy so I could make that happen with some SATA drives I had laying around.
The layout is based on the F238F drive tray that is in the system. There is no locking mechanism on this bracket but the front bezel does push against it holding it fairly securely.
This took me ~3.5 hours to print on a Prusa MK3 using PLA
I would highly recommend rotating the design so the legs are both on the bed.