Cabinet Handle Marking Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convenient tool for marking symmetrical drill holes for cabinet doors and handles
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 601
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a tool to measure and mark for drilling holes for cabinet hardware. works best as it comes with an awl, and than drilled with brad point drill bits. If used to mark, a mechanical pencil or fine point marker is needed since the holes are, by necessity, quite small. All the CAD files are available for customization and the Fusion 360 files are parametric.
Attached are CAD (fusion 360), 3MF, and gcode files. (sliced in CURA)
I used Ender 3s for these prints (200x200x300) with PEI build plates and sliced the gcode to print with the standard 0.2mm Cura profile with the exception of 1.5mm of retraction since I modified my printers to be direct drive.