1 / 12
Sliger CX4200A Rear Exhaust Fans
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printed mounts for rear fans enhance airflow in Sliger CX4200A.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Problem: The Sliger CX4200A case lacks integrated mounting points for rear exhaust fans.
Solution: Use 3D-printed parts to mount two 60mm fans at the rear of the case.
Design:
- The fans are mounted by sandwiching them against the rear grille with printed parts and secured using M3 bolts.
- A standalone DC-DC converter powers the fans, as the motherboard cannot supply sufficient power for all fans.
Read more about this project, get into the BOM, see other mods for the Sliger CX4200A here: https://esologic.com/sliger-mods