Bambu X/P Series Poop Chute (OpenSCAD; customizeable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customizeable OpenSCAD version of the Poop Chute by MKS_H
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 62
- Wydruki
- 2
- Wyświetlenia
- 266
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I liked the slim poop chute from MKS_H, but needed a version to fit the magnets I had on hand, so remodeled the entire thing in OpenSCAD.
This way you can easily adjust it to fit the size desired; I don't have an AMS and have minimized purging to 8% of the original, so I need only a tiny container (otherwise the poops fall behind the furniture).
Also added a lip to help with placement of the bin. Note that waste can frequently get caught on the lip, so you may want to remove it or slim it down a bit.
The default model for the bin is set to fit 6mm diameter magnets, 3mm thick just like the original, and is narrow so it doesn't cover any vents.
I highly recommend you customize it to fit your own needs. You can use the original .scad file to do so.
I also recommend you use the nightly/development snapshot build of OpenSCAD, which uses the super fast Manifold library instead of the super slow CGAL for rendering. Without Manifold, complex models are just unbearably slow.
Since it's not a structural part, you can print with just one wall and as low as 10% infill to improve weight savings.
Enjoy!