Paint bottle tray (fits 10ml Tamiya)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
12x ~35mm diameter bottle fits in the tray, allows stacking. Ideal for smaller sets of paints or a quick transfer.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 115
- Wydruki
- 1
- Wyświetlenia
- 596
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Originally I just wanted to print kahnindustries' tray but there are a lot of prints out there which do not respect specifics of additional manufacturing like that one, which makes me unhappy, so I decided to design my own. That being said, I still clearly took a heavy inspiration from @kahnindustries' design, so while not a remix per se, credit still should be given.
Anyway, it's going to be printed in two halves, and as always when two pieces are going to be fit together and one of them was printed upside down, your printer needs to be perfectly square! Nice way how to find out, by the way.;-) And the rest just requires a bit of a glue (we are makers, you surely have some on your hands, right? Probably even literally.)
Printing:
There is nothing special about slicing this time, nothing special required really: 0.2 is perfectly fine, 15% infill, no supports needed. There is just a lot of bridging in the bottom part, those pits take quite some print time, but are meant for better stability of multiple trays when being stacked on top of each other. Enjoy!
attached example is printed with Prusament Lime Green (blend).