1 / 2
Bruce Frankenstein Upgrade for 3D SETS Family - Ann & Bruce
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Transform your 3D SETS Family - Bruce as a character of Frankenstein
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (20)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (7)Powiązane
Warning
None.
Definition
None.
Printing
Is required the same printer size than 3D SETS has defined.
Infill 15% and layer 0.15mm is fine.
Build
Use 3D SETS Family universal connector.
Cut to adjust the connector if required
Feedback
It is welcome, post your builds.
Remark
None.
Version
v1/v20240809 1st upload.