1 / 3
Doppelzahnrad 126-127 für Bernardo P600G, Double gear 126-127 for Bernardo P600G — zdjęcie 1
1 / 3

Doppelzahnrad 126-127 für Bernardo P600G, Double gear 126-127 for Bernardo P600G

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Doppelzahnrad für zöllige Steigungen Double gear for imperial threads 18, 21, 31.5, 36, 42, 63, 72 & 84 tpi.

Ocena
0 / 5
Polubienia
2
Pobrania
19
Wydruki
0
Wyświetlenia
82
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Doppel-Zahnrad / Wechselzahnrad mit 126-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen.
Mit dem 126-127 Doppelzahnrad anstelle des originalen 120-127 und dem 32er Antriebsrad sind die Steigungen 36, 42, 63, 72 & 84 Gänge pro Zoll möglich. 
Mit dem 64er Zahnrad sind die Steigungen 18, 21, 31.5, 36 & 42 Gänge pro Zoll möglich.
Hebelstellungen siehe Tabelle.

Müßte auch an baugleiche Modelle wie HBM 280x600, Paulimot PM 3700 oder Warco GH 600 passen.

Gedruckt mit Prusa MK4
PLA
3 bis 4 Perimeter
50 % infill
Position der Naht: zufällig

Achtung: Für einen paßgenauen Sitz muß die 14mm Bohrung mit einer 14 H7 Reibahle auf genaues Maß gebracht werden!!

Falls es jemand druckt und verwendet, bitte um Rückmeldung ob es auch wirklich an den anderen genannten Drehmaschinen paßt.
……………………………………….
Double gear / change gear with 126-127 teeth for driving the feed gear on the Bernardo P600G lathe for cutting inch thread pitches.
With the 126-127 double gear instead of the original 120-127 and the 32 drive gear, the pitches 36, 42, 63, 72 & 84 threads per inch are possible.
With the 64 gear, the pitches 18, 21, 31.5, 36 & 42 threads per inch are possible.
See table for lever positions.

Should also fit identical models such as HBM 280x600, Paulimot PM 3700 or Warco GH 600.

Printed with Prusa MK4
PLA
3 to 4 perimeters
50% infill
Position of the seam: random

Please note: For a perfect fit, the 14mm hole must be brought to the exact size with a 14 H7 reamer!!

If anyone prints it and uses it, please let me know if it really fits on the other lathes mentioned.

Tagi