1 / 2
Bruce Pinkther Upgrade for 3D SETS Family - Ann & Bruce
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Transform your 3D SETS Family - Bruce as a character of Pink Panther
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (17)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (6)Powiązane
Warning
None.
Definition
None.
Printing
Is required the same printer size than 3D SETS has defined.
Infill 15% and layer 0.15mm is fine.
Build
Use 3D SETS Family universal connector.
No screw, may be some glue could be fine.
Feedback
It is welcome, post your builds.
Remark
None.
Version
v1/v20240809 1st upload.