1 / 5
Infinti G35 G37 / Nissan 350Z 370Z TS difuser rear access panel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
custom rear access panel for my CF TS rear diffuer to access jack lift and make install and removal easier.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 833
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
-Printed on Creality K1 in ASA for UV and Heat resistance
-2 walls
-2 layers top and bottom
-10% infill
-bed temp 60
-nozzle 220
-.2 nozzle- use brim if your printer is not enclosed.
-use supports for the tabs, file a groove inward on the tab so you slide this into position and have some adjustablilty before you drill in to you TS diffuser.
-PEI plate leaves a nice finished design
