Housing for 18650 battery cell capacity tester
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for a 4x 18650 cell capacity tester as sold on Ebay and Aliexpress as a naked PCB.
- Ocena
- 4,5 / 5
- Polubienia
- 65
- Pobrania
- 416
- Wydruki
- 5
- Wyświetlenia
- 1377
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The housing for the tester is based on the design from DtyPnt71, but completely modeled up from scratch.
The original design didn't fit some of the connections on my recently purchased capacity tester. it did lack cutouts for the fan cables to properly route them.
I reduced the wall thickness compared to the original design to a more sensible 2mm.
Text for button labels is reduced to be more legible.
I attached the step files for easy modification.
Printed in PETG with a 0.4mm nozzle, 0.2mm layer height.
The screws i used are M3x20.