Apple Cinema Display HD (23-Inch) Replacement Leg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement leg designed to fit the 23" Apple Cinema Display HD
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 144
- Wydruki
- 1
- Wyświetlenia
- 505
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement leg designed to fit the 23" HD ACD. I don't know if it will fit any other acrylic ACD models. There are two small indents at the bottom to place some rubber feet as with the original design. The model has been tested at a standard .2 layer height with 15% infill and does NOT hold up, print it with more infill and more walls.
The sample images have been printed in clear PLA for a (semi)-decent match to the original clear acrylic.
I printed it on it's side, with minor supports, see the attached photo for the support areas I used.