ImpulseRC APEX Antenna Mount + GPS (M8N) + Crossfire
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 443
- Wydruki
- 1
- Wyświetlenia
- 2299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move!
I created different versions for different SMA Connectors!
- added GPS Mount for this GPS Module
- added another SMA Version
- added flat surface version of "SMA Version" to print upside dow without supports (for Alexander )
- added crossfire antenna mount
- added "apex_antenna_mount_v2.stl" Use with original Crossfire Immortal-T Holder
had to FIX the height of some files, because i fucked it up! Now they dont sit flat on the printbed, so please use support to print them! =) I did it this way, because i dont want to redesign them all! Print it in TPU! I recommend SainSmart TPU!
### Support Me
If you like my free designs and want to support me and my FPV Blog:
- Buy me a Beer on Thingiverse ("tip designer" on the left)
- or simply like my Facebook Pageook.com/philipp.seidel.blog/)
Category: R/C Vehicles