1 / 7
Mini Z Semi Truck Body - 98mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Truck body for 98mm Mini-Z body with clearance for motor pod
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 234
- Wydruki
- 0
- Wyświetlenia
- 1010
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (19)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (29)Powiązane
This remix has the following changes:
- removed material from rear fender location for clearance to MM chassis motor pod
- added 1mm thickness side clips to tighten up body when clipped in place
- cut front clips to remove countersink features as this was causing thread engagement issues for me with the stock button head phillips screws
See 3mf files for support I used successfully with my MK3S+ & PETG.
For a box-stock MR-03, I use +1 front clip & +2 side clips.
Printed in FlashForge Burnt Titanium PETG @ 0.2 layer, 4 perimeters, 25% infill.
Support settings for easiest PETG removal:
- Style: Snug
- Top Contact Z Distance: 0.25mm
- Pattern Spacing: 3mm
- Top Interface Layers: 4 layers
- XY separation: 75%