CB09 Adapter For Silhouette Cameo 5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sharper & cheaper
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 260
- Wydruki
- 1
- Wyświetlenia
- 1597
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
🟩 🟦 🟦 🟪 🟥 🟧 🟨
I remixed the Cameo 4 adapter as I had a few problems with it:
My original print in resin did not fit my CB09 due to manufacturing differences
It was not possible to properly secure the adapter with the push fit thing in the device after fixing the above problem, I guess due to differences between 4 and 5 (I don't have the 4)
I wanted it to be easier to print on an FDM printer
This little remix fixes the above problems. This print can utilise multiple colours to show the setting indicators on top. If you don't have multiple colours, you can either ignore colouring them or remove the objects for these indicators to leave an indent.
Please note that using this may violate your warranty.
This prints directly on the print bed with tree supports supporting the two overhangs, with the top part of the adapter on the bed.
You will also need to print the bottom part of the original model and the top part that fits on the dial which you can find here.
There are Bambu Lab configured 3MFs, an unconfigured 3MF as well as the STEP file for the model.
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee using the button below. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨