Ryobi One+ 18v Battery Carrier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two battery carrier for Ryobi One+ 18v batteries. Attaches two batteries together for easier portability and storage.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 109
- Wydruki
- 2
- Wyświetlenia
- 527
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Two battery carrier for Ryobi 18v batteries with channels and slots for attaching handles and loops. Works well with the 6ah high performance batteries.
Got tired of clumsy spare batteries rattling around the car trunk and in cabinets and found it difficult to carry mutliple large capacity batteries along with the tool. This model was created to keep them together and allows attachment of cords or webbing to be handles. I used ½ inch webbing with a few stitches of paracord. The slots are modeled to fit 1 inch webbing and are wide enough for ¼ inch paracord.
The model should be printed with 2 battery cleats and 1 core. The cleats attach to the core with M3 screws that self thread into the core.
Printed well in PLA+ with 2 perimeter layers and no supports. 10% infill for the core and 15% infill for the cleats.