Mega-sized Brick Endor Forest and Luke Skywalker (5:1 scale)

This is a set of blocks that can be used to recreate the Endor moon Forest and Luke Skywalker minifig from set 7128 at 500% scale.  This is our second post from this set.  The first post containing the Scout Trooper and Speeder Bike can be found here.

The stl files for the parts have all been organized into folders to make them easier to find. 

Please use the following table to assist with colors and quantities when printing the various model parts:

Once you have all the parts printed, the instructions to build this set can be found in the docs folder.

For those with Bambu printers, there are two Bambu project files located in the “Bambu 3mf Files” folder to simplify things even further.  These files contain the parts in an ideal orientation for printing.  Some of the parts would benefit from being cut in the slicer before printing.  Those modifications are included in these files as well. Note that you will need BambuStudio to open or work with these files.

The Luke Skywalker minifig in this set was remixed from the Brick Megafigure published by Julia Ebert.  The only changes made to the original design are:

• A modified torso which includes a cavity to hold the torso sticker part provided with this design (the sticker part will need to be glued in place at this location).
• All parts were scaled down 50% to work with the rest of the model published here at a 5:1 scale from original Lego parts
• The waist parts were modified slightly to make them easier to assemble.
• At 50% scale, the pins were difficult to work with (and really not needed) so these were removed from the print list (Glue was still used to attach the connectors to their respective parts)

The basic instructions for assembling the figure can be found in Julia's post.  This is a fantastic model that's easy to print and assemble.  Special thanks to Julia for sharing this work!

All the parts needed to build this set were taken from thal72's Printables profile and scaled to 500%. He has a massive library of brick parts available at this location.  If you wish to do any additional customization to this set, this is a fantastic resource to find additional parts.  Special thanks to him as well for sharing this work!

The light saber used in this model was created by Printmajstr and was scaled to work with the rest of this set.  Thanks also to Printmajstr for sharing this work!

A couple more things to point out for those wishing to build this set:  

• The original design calls for a 4x10 plate in green as the base for building the trees. This block is too big to fit on the print bed of the Bambu P1P.  To get around this, we chose to use a 4x4 and 4x6 base plate instead.  Both of these parts are included in the stl folder.
• You can see in some of the photos that the light saber was illuminated.  This was done through the use of a battery operated LED.  These can be found on Amazon here. Once the saber is printed, these drop right in to the base and the blade fits nicely around them.

If you decide to print this, we'd love to see it.  Please post pics of your makes, and please consider liking this design by clicking the "like" link above.

Happy Building!!

Note: all our models are considered fan-made art and are intended for personal use only. We are not affiliated with any official brand and sales of digital files or physical copies (makes) is strictly prohibited.