SOVOL SV08 Stop the Filament spool unwinding.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SOVOL SV08 Stop the Filament spool unwinding. A quick 3D Print
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 191
- Wydruki
- 2
- Wyświetlenia
- 1253
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SOVOL SV08 Stop the Filament spool unwinding.
The filament spool has two skateboard bearing inside, one at each end, this IMHO makes it too easy to turn and as filament is pulled into the extruder the spool can rotate too much causing filament to come loose and result in filament jams.
This is a simple quick 3D Print to prevent this from happening.
You maybe able to loosen the or tighten the bolt to adjust how freely the spool rotates. I set my snug, the filament spool rotates on the plastic. Carboard spools or heavier spools maybe different
YouTube video:-
snap, same idea at near the same time. Like the idea of the filament light bulb. Show this is an issue.
SV08 spool holder spacer mod
https://www.printables.com/model/941785-sv08-spool-holder-spacer-mod