1 / 5
Funko Pop stand and podium - printable in 2 parts — zdjęcie 1
1 / 5

Funko Pop stand and podium - printable in 2 parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I totally liked the stand from Helmchen, buuuut i wanted it to print a bit faster (around 3h 40mins for the biggest…

Ocena
0 / 5
Polubienia
17
Pobrania
123
Wydruki
0
Wyświetlenia
1575
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I totally liked the stand from Helmchen, buuuut i wanted it to print a bit faster (around 3h 40mins for the biggest @0.2mm layer height and 60mm/s speed),print without support, and "waste" less material.

So the biggest stand of me uses 25g of filament (top and podium), while the original takes around 46g. And is printable in 2h 40min @0.2 layer height and 60mm/s (while the original runs for 3h 10mins.
Well yes, thats not a real benefit... also mine have to be glued together, when finished.

Ive reused nothing and built them by scratch, but obviously with the design of Helmchen in mind. So its a remix and all cheers and beers should go to his adress!

Print instructions

Category: Buildings & Structures Print Settings

Printer: Tevo Tornado

Rafts: No

Supports: No

Resolution: 0.2

Infill: 5

Filament: Owl Filament PLA Black How I Designed This

Here you see how i put the original file from Helmchen_fire into Tinkercad, and rebuilt the walls after that.

Tagi