Anti-tangle spool ball
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevent the filament spool from being tangled and trapped during printing using gravity.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 636
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This strange looking model feeds through the filament to prevent the filament spool from being tangled and trapped during printing using gravity. It applies constant pressure between the filament and the spool to make loosen the tension between them so that no knots are formed
This is a smaller and lighter version of the anti-tangle spool bullet that you can find on the link below:
https://www.printables.com/model/969956-anti-tangle-spool-bullet
There is a 3mm middle hole to insert the filament to feed the filament through and it needs to sit on the spool for it to work properly. There is a fitting for a M8 bolt nut to be fitted in so you will need to pause the print before the fitting closes.