Vase Mode R/C Pitot Air Scoop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vase mode print a light weight cooling inlet duct for R/C airplanes and cars. Prints two ducts. Resize as needed.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
A duct inlet/air scoop for cooling air on an R/C airplane or R/C car. Designed to be vase mode printed for a clean single layer lightweight part. As designed a single print will yield two copies of the inlet. Can be scaled uniformly or by individual axes as needed.
Includes a template for the hole through the surface the inlet is being mounted to. The template can also be used as a backing plate.
Print settings:
Recommend printing in vase mode oriented vertically, with no bottom layers and using an outer brim for bed adhesion. Slow print speeds and low accelerations may improve print quality and layer adhesion.
Related Models:
The Modular R/C Aircraft Collection
This collection is a set of models for R/C aircraft that I have designed to be generally interoperable and support design and fabrication of a wide range of aircraft configurations:
https://www.printables.com/@Uenbzsto/collections/2458682
Support This Project
If you liked this model, please consider buying me a coffee!
