1 / 3
Mammotion Luba/Yuka RTK antenna wall mount remix — zdjęcie 1
1 / 3

Mammotion Luba/Yuka RTK antenna wall mount remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Added a hole along the stem for downward cable exit, offering an alternative when rear cable routing isn't possible.

Ocena
5 / 5
Polubienia
27
Pobrania
506
Wydruki
1
Wyświetlenia
2357
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I've modified the original Mammotion Luba RTK Antenna Wall Mount to include a hole along the length of the stem, allowing the cable to exit downward. This update provides an alternative solution for cable management, especially if routing the cable through the back is not possible.

Special thanks to the original designer, @stenborg_235150, for their excellent work on the initial model!

  • I modified 'Wall mount 2' (44mm tube).
  • Printed in ASA at 0.2mm layer, 15% infill.

Tagi