Defy_Tenting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is 3d printed tenting kit for the Dygma Defy keyboard
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is a DIY 3d printed tenting kit designed by me. Why? Well, why just purchase the option from the professionals when you can terrorize yourself with an overly complicated project?
It works by screwing the base into the 4 mounting points under each unit. The joints are made by inserting 3 or 4 mm heated inserts into the insert holes for 3 or 4 mm machine screws to fasten to. The small arms that pivot have a 4 mm heat press insert for a machine screw to fasten to. The level of tilt is adjusted by rotating the machine screw in the required direction. The head of the screw fits into a small pivoting piece that's fit in place with intendents and detents.
This is a personal project and was not design from the ground up to share, so it's very rough. Feel free to use however you want and no need to provide credit, enjoy!