1 / 3
Wonder Oven/Air Fryer Risers and Tray Storage
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lifts the wonder oven to allow to door to fully open and adds storage for the baking trays
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
A fix for the Wonder Oven/Air Fryer!
If you own one you know that there is a design flaw and the door does not open fully when placed flat on a surface. This raises the oven up so that the door can open fully (and you can pull trays out without tipping them). It also provides storage slots for all of the standard trays/inserts that come with the oven for clean and easy storage.
Printing
- Definitely print with PETG or similar for strength, food safety and ability to handle more heat. Also better for storing the trays after cleaning/getting water on the base
- I used 10% infill with PETG and it is holding up just fine
- 2 files included:
- Print 2x of the Legs (these will go on the 2 left feet of the oven)
- Print 1x of the Legs + Tray Stand (this is a single piece that includes both right legs and the attached slots for the baking pan, air fry basket and grill tray)
