Hypercube Support for Bedisolation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you want to isolate your heated bed with silicon wool, you will notice that this stuff doesnt adhere well to the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 396
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you want to isolate your heated bed with silicon wool, you will notice that this stuff doesnt adhere well to the common 3M strips or the likes; it will just peel itself off.
So, since we already have kind of an underconstruction to just put the silicon wool between this and the heated bed, i just needed something to put some support in the middle.
I designed this for the standard Cube Anet A8 Construction, but i think its also fitting for the standard Hypercube Evolution.
I measured 140mm in length, and so i designed this to be a tad longer (142mm i think), so
it presses the wool a tad up.
If you have an underconstruction of another size, just measure that out, and scale that up in the cad of your choice.
Print instructions
Category: 3D Printer Parts Print Settings
Printer: CubeAnet A8
Rafts: No
Supports: No
Resolution: 0.3
Infill: 15%
Filament: Owl Filament PETG Red
Notes:
The Filament isnt good, but for functional prints like that its good enough.