UMX Timber FPV Cowling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this cowling so I could add an FPV camera to my UMX Timber and not have to modify the stock foam cowling.…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I designed this cowling so I could add an FPV camera to my UMX Timber and not have to modify the stock foam cowling. The camera holder is designed to work with the Wolfwhoop WT02 or similar sized cameras. The camera swivel requires a small machine screw and nut.
I think it was a #3x3/4" screw and nut.
https://www.amazon.com/gp/product/B06X96VPSQ/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1
To save weight I suggest using the smallest infill percentage as possible. I used a 10% infill. There are two flat areas on the bottom for adding magnets to it.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
Yes
Category: R/C Vehicles