Compact/Portable T12 STM32 (KSGER) Soldering Station with EC3 and USB-C input
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed and printed a custom case for a STM32 T12 Soldering station as my previous setup was a lot of pieces. It…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 671
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I designed and printed a custom case for a STM32 T12 Soldering station as my previous setup was a lot of pieces. It turned out a bit bigger than i wanted but still quite compact. It is quite a bit smaller than even the smallest regular case I found and has the additional bonus that the electronics can be inserted and removed without de-soldering anything.
Parts:
- KSGER V2.01 (Cheapest one I found with the removable connector portion)
- T12 handle (I had one laying around)
- Small USB-C PD sink board (The "Type-E" version) to get 20/15v from USB-C sources (That support 20 or 15v modes. At 5v or 7v it will not work, 12v might just barely)
- EC3 connector
- Some wires
6 m2 screws This is the 3rd design I made myself and the first I am releasing.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
0.2mm leyers, 0.4mm nozzle @ 0.6mm layer width
Infill:
15%
Filament:
Trash-tier PLA Black (Recycled)
Notes:
Printer is pretty heavily modified and somewhat damaged (could not be bothered to fix it jet).
It is pretty easy to print.Also enable ironing so the 2 halves fit better.
How I Designed This
Designed in fusion360, I have very little idea what I am doing but the timeline thing is pretty neat.
Category: Electronics