Lamp shade for flat torchiere / Brightech Sky LED lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple lampshade designed for Brightech Sky LED torchiere lamp. May work with some of the many similar lamps.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
Simple lamp shade designed for a flat torchiere floor lamp. The specific model is the Brightech Sky LED Torchiere Floor Lamp, but it should work for other similar lamps. Measure your lamp's head and pole to be sure.
Secured to underside of lamp head with some double-sided tape.
Dimensions are 284 x 284 x 60mm, so you need a large print bed for this. This works by pulling the shade up through the pole, and the hole for the pole is 20mm in diameter.
Recommended print settings:
- Designed for a 0.4mm nozzle, as the wall is precisely 0.4mm thick. You can use vase mode/spiralize outer contour, but shouldn't need to. For some reason when I enabled this, it removed the hole from the bottom.
- 0.2mm layer height.
- 2 bottom layers. This will take up about half of the print time of 2 hours.
- Concentric top/bottom pattern.
This is rather niche, so be sure to like if this worked for you :).