1 / 1
Miniature hose clamp (M5 metric grub screw)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hose clamp that uses M5 grub screw.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (23)Powiązane
Tested with PLA 0.4mm nozzle
Default length is 240mm (approx 75mm diameter), trim to length in slicer or after printing
Thread the end into the screw housing up to the end stop then wrap around thread the free end through the other side on top and then install the grub screw (M5x5mm), tighten.
