TCG Deck Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 2-part vase mode deck box for storing ~100 single-sleeved trading cards for TCGs such at Magic: The Gathering.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 981
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
This deck box is sized to fit 100 single-sleeved trading cards with some extra room for tokens. Got a Commander deck? It should fit in one of these.
Specifically, the interior dimensions are 69x69x94mm. See below if you want to customize this for different numbers of cards.
The two halves are identical apart from the latch section.
Printing Notes
- The provided STLs require a 0.8mm wall width. This is achievable on a 0.4mm nozzle but YMMV.
- The provided STLs assume a 1mm base thickness. This means with a 0.2mm layer height you need 5 solid base layers.
- This is a vase mode print.
- I've used PLA for my prints, but other materials should work well too.
- The 3mf project file includes the settings I use to print these on my Bambulab P1S
Customizing
I've included the deck_box.scad source file to aid in producing customized versions of this model. You'll need a development snapshot build of OpenSCAD as the most recent ‘stable’ version is from 2021. I use 2024.04.08 but the most recent development snapshot from here should be fine: https://openscad.org/downloads.html#snapshots
All the variables for resizing the box are available in the customizer panel. The one you probably care about is inner_dimensions.y. Changing this will let you make a box for different numbers of cards. You can change the wall thickness too, but i don't recommend going lower than the default 0.8mm as, for PLA at least, it results in a flimsy final product.