1 / 8
Church of St.Michael in Dolné Zahorany Slovakia — zdjęcie 1
1 / 8

Church of St.Michael in Dolné Zahorany Slovakia

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Detaliled info from church on: https://en.wikipedia.org/wiki/Doln%C3%A9_Zahorany

Ocena
0 / 5
Polubienia
7
Pobrania
34
Wydruki
0
Wyświetlenia
214
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Printed on Prusa MINI with nozzle 0,25 mm. The size of the mockup: 125x65x105mm. Material: PLA from vanilla yellow and burgundy red. Crosses from gold PLA. Walls printed without supports. Only the crosses needs to be printed with support. Roof 3 and 6 must be printed with a brim. I will post some g-codes of how I printed it with a Prusa MINI with a 0.25 nozzle. I also tried printing it with a 0.4 nozzle, but it didn't work out so well with Ender 3 v2.

Tagi