Soft Trivet for double-wall coffee beaker - EASY TPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protect your carafe's glass from your countertop with a coffee bean inspired flexible trivet. Washable.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is an easy to print TPU trivet meant to protect the bottom of a borosilica glass pour-over coffee urn from Fellow. The trivet will not work with hot pots and pans - but works with a coffee urn that is double walled with an air-gap such as the Fellow pour-over coffee beaker (shown).
I chose NinjaTek's very soft NinjaFlex for this print and it was a good choice. The resulting trivet is floppy under it's own weight, and tacky on the glass bottom even when wet. The trivet will handle spills and can take a boiling water droplet overflow well without damage.
If you slice your print for two colors, position the color change just above the top infill layer where the “beans” start to rise up.