7 Segment Mechanical Counter, ballpoint pen spring adapter/ intermediate piece for short springs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Intermediate piece to use the Origanal version with small ballpoint pen springs. No modification, just 4 Pens needed
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 121
- Wydruki
- 2
- Wyświetlenia
- 1360
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
🔥Small spacers to operate the original version with ballpoint pen springs🔥
No need to buy a large spring or make any other adjustments (no glue or lubrication required).
What you need: (2 versions possible, please measure the inner diameter of the spring)
✅ 2x the spacers (or more if the spring is too short!)
✅ 4x ballpoint pen springs
Once the springs and spacers have been inserted into the guide, the springs must protrude slightly from the guide when untensioned (see picture), only then will the mechanism have enough force to function properly. If the springs are too short, insert more spacers!
General Settings:
Material: PLA
Layer Height: 0.2mm
Infill: 100%
Supports: Yes