Thomas Minis Brio Style Train Tracks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brio-style tracks for Thomas Minis.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 246
- Wydruki
- 1
- Wyświetlenia
- 819
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- BSD License
I could not find any printable tracks for the [Thomas Minis] trains, so I set out to create some, and learn more OpenSCAD along the way.
There are many (most?) of the available, [modern Brio pieces] recreated here, and a few non-standard parts. My print bed was only 120x120, so larger parts are available in the full size, and split into smaller pieces.
I tried to name the parts consistently, in a way that conveyed adequate info about them. Sections are separated by underscores ( _ ), and within those sections, info is separated with dashes ( - ). Sections marked with an asterisk ( * ) are not always present.
- (PartGroup)_(PartSubType)*_(SplitPartIdentifier)*_(Dimensions)_(BrioIdentifier)*.stl
An Example using all sections: QuadCurve-Cross_SmR_PART_Xof4_L1.5-C.25_X
- PartGroup: QuadCurve-Cross
- PartSubType: SmR (small radius)
- SplitPartIdentifier: PART_Xof4 (broken into 4 equal parts)
- Dimensions: L1.5-C.25 (straight Length - Circumference)
- BrioIdentifier: X
All dimensions are defined toward the top of the SCAD file, but for naming the important values are:
- L - Length = 110mm
- LgR - Large Radius Curve = 150mm
- SmR - Small Radius Curve = 67.5mm
I test printed many parts along the way, but in their final form, the following pieces have been test printed:
- Acc_Connector
- Curve_SmR_L-Str_L.75-C.125_O1-P1
- Curve_SmR_R-Str_L.75-C.125_O1-P1
- DoubleCurve_SmR_L-R-Str_PART_1of3_L1.5-C.25_T
- DoubleCurve_SmR_L-R-Str_PART_2of3_L1.5-C.25_T
- Curve_Double_L_LgR-SmR_C.125-C.25
- QuadCurve-Cross_SmR_PART_Xof4_L1.5-C.25_X (Printed 4)