freestanding desktop pegboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brackets that slot around the corners of two pieces of pegboard to create a stable freestanding structure
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
I designed these brackets because I wanted a small pegboard for my desk and didn't want to drill holes in the wall or make a heavy frame out of wood. I came up with this simple idea to use two pieces of pegboard from the hardware store (in my case, a 2'x4' piece cut in half), the back vertical and the front slightly angled for stability.
Since the pegboard pattern isn't always the same distance from the edges, I printed the brackets first, used them as a guide to drill new mounting holes, popped drywall anchors in, and attached with 2 wood screws per corner.
The hex pattern on the side was modelled to match the honeycomb storage wall (https://www.printables.com/model/152592-honeycomb-storage-wall) so you can attach compatible prints on either side of the structure.
There are holes in the bottom brackets which you can use to screw them down or align with dowels. I happened to have a shelf on my desk that was the perfect size to mount the board above, so there are two versions of the bottom bracket, with and without a lip.
Parts list
Print the top and bottom pieces, mirror for left and right. Print the parts hex side down as shown in the pictures.
- "bottom_lip" has a locating feature that fits nicely on top of a 12cm deep shelf (see photo)
- "bottom_no_lip" has a flat base
These are the parts I used because I had them on hand:
- 2x 2'x2' pegboard, .2" thick
- 8x drywall anchors
- 8x wood screws